Mopar 2013-2018 Dodge RAM 2500-5500 6.7L Cummins Oil Fuel Filter Kit OEM 5083285AA, 68197867AB, and 68157291AA (MO-285, MO-867, MO-291)

Enhance the performance of your 2013-2018 Dodge Ram 6.7L Cummins engine with the Mopar OEM Diesel Engine Filter Set, featuring 5083285AA, 68197867AB, and 68157291AA. These filters are easy to install and provide superior protection and efficiency for your engine. Enjoy fast delivery, volume discounts, and free shipping across the USA.

The Mopar OEM oil filter is specifically designed to remove dirt and debris from the diesel fuel of 2013-2018 Dodge RAM 2500-5500 vehicles equipped with a 6.7L Cummins engine. This filter maximizes fuel system performance and ensures long-lasting engine health. It’s crafted to meet Dodge RAM`s high-quality standards and therefore, it helps keep your truck running smoothly and efficiently.

Product Specification:

 

Best Vehicle Fits for Mopar 5083285AA, 68197867AB, 68157291AA:

 

 

Guide to Changing Oil and Fuel Filters on a 2013-2018 RAM 6.7L Cummins

Maintaining your RAM 6.7L Cummins engine involves regular oil and fuel filter changes to ensure optimal performance and longevity. Follow this guide for a step-by-step process.

Tools and Supplies Needed:

For Oil Change:

• New Engine Oil (Refer to your owner’s manual for the correct type and quantity)
• New Oil Filter: Mopar 05083285AA
• Oil Filter Wrench
• Socket Set and Ratchet
• Oil Drain Pan
• Funnel
• Jack and Jack Stands (if needed)
• Gloves and Rags

For Fuel Filter Change:

• New Fuel Filters:
  • Mopar 68157291AA (Primary Fuel Filter)
  • Mopar 68436631AA (Secondary Fuel Filter)
• Fuel Filter Wrench (if needed)
• Socket Set and Ratchet
• Safety Glasses and Gloves
• Rags

Oil Filter Replacement:

1. Prepare Your Vehicle:

• Safety First: Park your RAM on a level surface and engage the parking brake.
• Lift the Vehicle: Use a jack to lift the front end and secure it with jack stands if necessary.

2. Drain the Old Oil:

• Locate the Oil Drain Plug: Find the drain plug on the oil pan underneath the vehicle.
• Position the Oil Drain Pan: Place it under the drain plug.
• Remove the Drain Plug: Use the socket set to carefully remove the drain plug and let the oil drain completely.

3. Remove the Old Oil Filter:

• Locate the Oil Filter: Typically found on the side of the engine block.
• Use an Oil Filter Wrench: Turn the filter counterclockwise to remove it. Expect some residual oil to spill out.

4. Install the New Oil Filter:

• Prepare the New Filter: Apply a small amount of new oil to the rubber gasket on the new filter.
• Install the Filter: Screw the new filter into place by hand. Tighten it until snug, but avoid over-tightening.

5. Replace the Oil Drain Plug:

• Clean and Reinstall: Clean the drain plug and reinstall it into the oil pan. Tighten it securely.

6. Add New Oil:

• Locate the Oil Filler Cap: Open the hood and remove the oil filler cap.
• Use a Funnel: Pour the new oil into the engine. Refer to your owner’s manual for the correct oil type and quantity.
• Replace the Oil Filler Cap: Once done, replace and tighten the oil filler cap.

7. Check the Oil Level:

• Use the Dipstick: After adding oil, wait a few minutes, then check the oil level with the dipstick. Add more oil if necessary.

8. Lower the Vehicle and Check for Leaks:

• Remove the Jack Stands: Carefully lower the vehicle.
• Check for Leaks: Start the engine and let it run for a minute. Inspect underneath for any leaks.

Fuel Filter Replacement:

1. Prepare Your Vehicle:

• Safety First: Park the vehicle on a level surface and engage the parking brake. Lift the truck if the filter is located underneath, securing it with jack stands.

2. Relieve Fuel System Pressure:

• Locate the Fuel Pump Fuse/Relay: Refer to your owner’s manual for its location.
• Start the Engine and Run Until It Stalls: This relieves pressure in the fuel system. Turn off the ignition.

3. Remove the Old Fuel Filters:

• Locate the Fuel Filters: The primary filter is often found along the fuel line near the engine, and the secondary filter may be positioned elsewhere in the system.
• Disconnect the Fuel Lines: Use rags to catch any spilling fuel. A special tool might be needed to disconnect the lines.
• Remove the Filters: Use a fuel filter wrench or appropriate tool to remove both filters.

4. Install the New Fuel Filters:

• Position the Filters: Install the new filters in their respective locations. Ensure the flow direction is correct (usually indicated by an arrow).
• Reconnect the Fuel Lines: Attach the lines to the new filters and ensure they are securely fastened.

5. Reinstall the Fuel Pump Fuse/Relay:

• Replace the Fuse/Relay: Reinstall the fuse or relay that was removed.

6. Check for Leaks:

• Turn the Ignition On: Without starting the engine, turn the key to the "On" position to pressurize the fuel system.
• Inspect for Leaks: Check around the new filters for any signs of leakage.

7. Lower the Vehicle (if lifted):

• Remove the Jack Stands: Carefully lower the vehicle.

Final Steps:

1. Dispose of Old Oil and Filters:

   • Take the used oil and filters to a recycling center or an auto parts store that accepts used motor oil and filters.

2. Record the Maintenance:

   • Keep a record of the filter and oil changes for future reference and maintenance tracking.

Note: Always consult your RAM’s service manual for model-specific instructions and part numbers. If you’re unsure or uncomfortable performing these tasks, consider seeking help from a professional mechanic.